Synthetic paper
技术参数法森牌合成纸2/HP104/62克白色格拉辛底纸产品编号# / BW5054 (imp.)修订日期: 6-Nov-2007表面基材应用适用于制成高品质标签，应用在一些难贴的表面等，是聚丙烯容器及环保的理想标贴材料。 由于面材较硬，不适合用于不规则曲面及特别柔软的瓶体。此材料不适用在PVC基材上。以上的建议应用说明不作为艾利·丹尼森的一种担保。所有艾
- Model：
Technical Parameters
Fassen Synthetic Paper 2/HP104/62g White Glassine Paper
Product Code# / BW5054 (imp.)
Revision date: 6-Nov-2007
Surface substrate
application
It is suitable for making high-quality labels, applied to some difficult-to-stick surfaces, etc. It is an ideal labeling material for polypropylene containers and environmental protection. Due to the hard surface, it is not suitable for irregular surfaces and particularly soft bottles.
This material is not suitable for use on PVC substrates.
The above suggested application note is not a guarantee for Avery Dennison. All Avery Dennison products are sold at the customer's end-use environment to confirm compliance with the environment.
Printing and processing
The surface is specially coated for high-quality monochrome and color printing in a variety of printing formats, as well as thermal transfer printing. Care should be taken to control the viscosity of the ink to avoid over-sticking of the coating. Ink and ribbon testing before printing is necessary. In order to ensure smooth processing, it is recommended to use a sharp film-specific die cutter, especially in flat die-cutting. Excellent bronzing performance and effect. Excessive tension should be avoided and the label should overflow.
Storage period
It can be stored for one year at a temperature of 23 ± 2 C and a relative humidity of 50 ± 5%.
Instructions for use
All Avery Dennison products are sold at the customer's end-use environment to confirm compliance with the environment.
A matt white polypropylene film that has been subjected to biaxial stretching.
Basic weight
62±10%
g/m2 ISO 536
Thickness
0.075±10%
Mm ISO 534
Adhesive
A universal permanent rubber-based adhesive.
The end of paper
White Glasing paper treated with super calendering.
Basic weight
61±10%
g/m2 ISO 536
Thickness
0.055±10%
Mm ISO 534
Typical viscosity value
Initial viscosity 14.0 N/25mm FTM 9 st.st.
20 minutes 90 degree peeling viscosity 8.0 N/25mm FTM 2 st.st.
24 hour 90 degree peeling viscosity 10.0 N/25mm FTM 2 st.st.
Minimum labeling temperature 10 ° C
Operating temperature range -15°C-+65°C
Adhesive performance
This is an adhesive with an extremely high initial viscosity and ultimate viscosity. Excellent performance on many packaging materials.
Laminate
Total Caliper
Mm +/- 10%
Product Hotline: +86-0755-23281611